Structure principle of horizontal hydraulic packer with door,The horizontal door hydraulic baler includes a bracket, which is equipped with a base plate and front and rear side baffles. A jack is installed on the bracket, and the jack is equipped with a piston rod. 

The right end of the piston rod is connected with a vertical pusher plate, and the right side of the pusher plate is connected with a pusher strip. The gap between the adjacent pusher strips is a rope groove on the plate; The upper right part of the bracket is provided with a pressing upper baffle, and the bracket on the left side of the pressing upper baffle is provided with a feeding port; The bracket on the right side of the front and rear side baffles is fixedly connected with the front and rear side baffles respectively, and the gap between the adjacent side baffles is the rope threading opening; The right end of the bracket is provided with a discharge port, the right end of the bracket at the discharge port is hinged with a door panel, the left side of the door panel is connected with a door panel, and the gap between the adjacent door panels is a rope groove on the door; The cavity enclosed by front and rear side baffle, push plate and bottom plate is feeding cavity, and the cavity enclosed by front and rear side baffle, upper baffle, door plate and bottom plate is extruding cavity; The right end of the door plate and the bracket is fixedly connected with a locking device. And the size of the package can be adjusted within a certain range according to the needs.