The wire rack of small horizontal waste paper packer is composed of four sets of wire devices installed on a frame. The whole wire rack is suspended on a shaft of the clamping frame, and moves horizontally relative to the clamping frame under the action of hydraulic motor. The clamping frame is a welded component with wheels at the bottom, which can move horizontally along the main slide rail under the push of hydraulic cylinder. The lifting platform is mainly composed of two horizontal beams bolted together. The lifting platform can move up and down in the vertical direction driven by two hydraulic cylinders.

The structure of the hold down frame is similar to that of the hold down frame, but four packing heads and a set of wire feeding device are arranged on the hold down frame. The packaging heads of waste paper hydraulic baler (4 in total) are the components of the whole equipment with complex structure and multiple interlocking actions. The packaging heads of each waste paper hydraulic baler have the same structure and can be interchanged. There are 4 sets of wire feeding devices, each of which corresponds to a packing head. Each set includes a packing line conveying device and a packing line anti tensioning device. The main rail seat of waste paper hydraulic baler is mainly composed of two wear-resistant rails on the surface. The wheel of the press frame is guided to run along the outer side of the two tracks, and the hydraulic cylinder driving the press frame to run is arranged in it. In addition, in addition to mechanical components, there is a complete set of hydraulic station. It can be seen from the above description that various movements of waste paper hydraulic baler are completed by fluid power.