Automatic punching machine is suitable for electronic, nameplate, label, packaging, printing and other industries. Soft plate, film, film, name plate, paper, FPC, pet, PE, PC, PVC film, polyester, thin aluminum plate and other sheet positioning hole materials.

working principle:

The working target center is captured by CCD camera. After imaging, the operating system carries out analysis and processing, and the central processor controls the X and Y axes. While the displacement is transmitted, the signal is processed for punching. The operator only needs to place the workpiece at any point within the CCD visual range. The technology has comprehensively improved the traditional processing technology, and is widely used in the electronic film panel, flexible circuit board, touch screen, nameplates, signboards, key IMD / IML and other industries.

Technical parameters:

1. Punching diameter: Φ 0.5－ Φ 5mm (standard configuration) (larger for customization)

2. Display: 8 inch LCD

3. Identification circle diameter: Φ 1－ Φ 5mm (with "cross circle" Peugeot double circle diagram)

4. Working pressure: 0.4-0.7mpa

5. Punching error: ≤ ± 0.008mm    

6. Power consumption: 0.4KW  

7. Voltage: 220 v-240 V

8. Overall dimension: 1250 × 770mm (long) × Width)

9. Net weight: 198kg