Product features:

1. The electrical appliances and PLC software of the ink printing machine are made of Qingdao Dongyuan, Taiwan Haitaike and other domestic famous brands, with stable and reliable quality.

2. The bearings are made of Japanese NSK, humanism and other high-quality brands.

3. The gear and other transmission parts are made of alloy steel by precision grinding. The strength, hardness, plasticity, impact strength and fatigue strength of the gear are improved by heat treatment process, and the quality of the gear is guaranteed by Vickers hardness standard.

4. The transmission gear is made of alloy steel, which is shaped by gear grinding process. The helical gear design is adopted to enhance the gear tooth width and increase the gear contact area, so as to minimize the overall damage caused by the instantaneous acceleration torque of the machine.

5. Spray gear oil supply system and manual centralized oil supply system are adopted for oil supply system of each unit（ Ensure minimum mechanical wear)

6. The gear oil tanks of each unit are connected by oil leveler, so that the oil storage of each group of mechanical oil tanks remains the same, and the overall observation is made through the display meter.

7. The vacuum adsorption leading edge paper feeding system is equipped with double paper holding shafts (the lower shaft is embossing process to increase friction, the upper shaft is scraping process, and the lattice design to improve the compression resistance of paperboard) to ensure the paper feeding accuracy and reduce the error. All the shafts are dynamically balanced. With sheet feeding function, increase the range of order.

8. The whole machine's phase, plate roller's transverse movement and imprint gap are all adjusted by electric adjustment (reducing debugging time and improving work efficiency)

9. Integrate the air duct exhaust system to reduce the dust and impurities around the machine and improve the printing quality.

10. The compound slotting is equipped with independent line pressing (outer circle glue scraping process), which can effectively prevent false line pressing, line explosion and other problems.

11. The semi open electronic control pneumatic scraper can scrape the ink evenly and improve the printing quality.

12. Upper suction and dust removal system, clean paperboard impurities.

13. The wall panel is 65mm thick, aging treatment and tempering are adopted to eliminate the internal stress of metal, so that it will not deform after long-term use.

14. The working clearance of the whole machine is adjusted quickly without spanner. It is fast and convenient to carry out the adjustment, and it is equipped with a disc observation table.

15. The main engine adopts frequency conversion control, with automatic protection function (stop working in case of emergency), which makes the start and operation more safe, stable and energy-saving.

16. Pneumatic plate lifting device (manual and pneumatic switches can be switched independently) to prevent ink from drying during shutdown.

17. Independent drying system can effectively solve the problems of printing deinking and full page printing.