As a kind of packaging equipment we often use, we need to understand this kind of equipment before using it. The second is its structure and operation method. Let's understand the working principle of the packer.

The packing object is basically in the middle of the packer. First, the right top body rises, presses the front end of the belt, and tightens the belt on the object. Then, the left top body rises to press the proper position of the lower belt. The heating plate extends into the middle of the two belts. The middle top knife rises, cuts off the belt, and sends the next belt to the position to complete one working cycle. Baling machine is a kind of machine that uses baling tape to wrap products or packages, then tighten and connect the two ends through thermal effect melting or using buckle and other materials. The function of the baler is to make the plastic belt cling to the surface of the strapped package, so as to ensure that the package will not be scattered due to the loose strapping during transportation and storage, and at the same time, the strapping should be neat and beautiful.

In fact, the packer is very simple, just moving a few buttons. After starting the packer again, press a button to let it work. Then automatically pack it, and let it stop working after packing. This is very simple. If you don't understand it, you will learn by watching a field operation.