Slag Separator
Slag Separator
Slag Separator
Slag Separator
Slag Separator
Slag Separator
Slag Separator
Slag Separator

Slag Separator

ZSR type slag separator is generally used to deal with impurities from coarse screening, which has the characteristics of no vibration, small wear and full sealing。

call the hotline to learn more

+86-18103825939
+86-18103825939

ZSR type slag separator is generally used to deal with impurities from coarse screening, which has the characteristics of no vibration, small wear and full sealing.It is also very suitable for the treatment of slurry from ZDF fiber machine.

Structure principle of slag separator:

The equipment consists of a welded assembly body, which supports the sieve plate, rotor, collecting tank, waste discharge tank and bracket. It is installed horizontally.

The equipment is driven by belt, the pulley and belt can be installed at either end of the equipment, and the motor is installed near the equipment.

The rotor is a long cylinder structure with blades. The blades are close to the main body of the equipment. The angle of the blades on the rotor is preset,

To optimize the angle.The shaft is designed so that the drive belt can be installed at either end of the equipment.The rotor is supported by two end bearing blocks on both sides of the housing.

The shell cover is easy to remove, and the internal components are easy to repair. The rotor or sieve plate can be repaired without removing the inlet pipe and pulley.The cover is provided with a baffle to prevent the axial reflux of the slurry, and the slurry is pushed forward by the rotor.

The good slurry outlet tank and slag discharge tank are part of the overall structure. The good slurry tank is used to collect filtrate, and its design increases the equipment strength.The slag chute is located on the outrigger opposite the inlet end.

The sieve plate with holes is semi cylindrical, and the through holes on the sieve plate can be different according to different service conditions.The sieve plate is fixed on the shell with bolts.

Advantages of slag separator:

1.After treatment, the fiber content of coarse slag is less, and there is basically no water, which reduces the cost of subsequent slag treatment.

2.The specially designed rotor has low friction, which ensures the integrity of slag discharge and realizes the efficient separation of waste slag and slurry.

3.The openable upper cover makes the maintenance more simple and convenient.

4.Equipped with flushing water pipe to reduce screen drum blockage and fiber loss.

Technical parameters of slag separator:

image.png

Copyright:Henan Baimuda ICP备案 豫ICP备19025741号-1